Auto-Cut Cut-Off Machines

Description

The “Auto-Cut” CNC Carbide Cut-Off Machine automatically cuts carbide rod into precision lengths. This production machine, designed for cutting tool manufacturers and carbide rod processors, has a large capacity magazine and an automatic loader to allow for hours of unattended operation.

The “Auto-Cut” can double the production rate for cutting carbide and hardened steel rod when compared with manual cut-off machines. It has easy to use CNC controls with a touch screen operator interface. Parameters can be quickly set for rod diameter and length. The machine automatically loads and cuts rods from a large capacity magazine.

Capacity of the “Auto-Cut” is 0.055” (1.4 mm) to 1.575” (40 mm) diameter rod, length capacity 3.150″ (80 mm) to 16.535″ (420 mm), and comes standard with a flood coolant system.”

Features
  • Easy to use CNC Control with touch pad operator interface
  • Parameters easily set for rod diameter, length, etc.
  • Automatically loads and cuts bars from large capacity magazine
  • 5 hp spindle motor
  • Clamps bar stock on each side of the cut-off wheel.
  • Automatically compensates for wheel wear.
  • Standard Accessories
  • Diamond cut-off wheel
  • Magazine insert for use with large diameter rods
  • Machine set-up and training by Rush Machinery personnel
  • Detailed operator manual
  • Flood coolant system
  • Catch basket with cushioning rubber mat

 

Optional Accessories

  • Fire Suppression System (required when using oil as flood coolant).

2 Rod CNC 'Auto-Cut'

20160715 CH-CM0206
Description

The 2 Rod “Auto-Cut” CNC Carbide Cut-Off Machine automatically cuts carbide rod into precision lengths. This production machine, designed for cutting tool manufacturers  and carbide rod processors, has a large capacity magazine and an automatic loader to provide hours of unattended operation.

The 2 Rod “Auto-Cut” can quadruple the production rate for cutting carbide and hardened steel rod when compared with manual cut-off machines. It has easy to use CNC controls with a touch screen operator interface. Parameters can be quickly set for rod diameter and length. The machine automatically loads and cuts rods from a large capacity magazine.

Capacity of the 2 Rod “Auto-Cut” is .079” (2 mm) to .787” (20 mm) diameter rod, up to 15 3/4” (400 mm) long, and comes standard with a flood coolant system.”

Features
  • Cuts tungsten carbide rod and hardened steel rod
  • Diameter capacity of .079″ (2 mm) to .787″ (20 mm)
  • Length capacity of 1-3/16″ (30 mm) to 15-3/4″ (400 mm)
  • Automatic (from large magazine) or manual rod loading
  • 5.5HP (4kw) spindle motor
  • 17 gallon (65 liter) Flood Coolant System capacity
  • Twin pneumatic clamps hold rod on both sides of wheel
  • Full work area enclosure with a large viewing window and a provision for mist collector connection
  • Liquid-proof fluorescent work area lamp
  • CNC control with sealed touch panel
  • Tower indicating light signals machine status to the operator
  • Wheel sensor detects wheel edge to monitor and automatically compensate for wheel wear
  • Cut-off wheel: 8″ (200 mm) diam., .040″ (1 mm) wide diamond (carbide) or CBN (HSS), .750″ (19 mm) bore

Optional Accessories

  • 30 Gallon Coolant System – two stage filter with 40 micron paper filter roll with 5 micron filter bag
  • Mist Collection – high efficiency air filtration up to 97% on submicron particles
  • Fire Suppression System – automatic thermal sensor detection, manual emergency override
Downloadable Brochure

Rush 2 Rod Auto-Cut Brochure English