Easy-Cut Cut-Off Machine

Description
The Rush Easy-Cut is a fully enclosed semi-automatic cut-off machine. Use the Rush Easy-Cut for quick and easy cutting of carbide rod and tool ends with diameters between 1/8″ (3.175 mm) to 1-1/4″ (31.75 mm). It’s also great for high speed steel! PLC controlled, the Rush Easy-Cut has air actuated work piece clamping and hydraulic feed cutting stroke with a neutral button for manual positioning/feeding. Built in the USA.
The “Auto-Cut” CNC Carbide Cut-Off Machine automatically cuts carbide rod into precision lengths. This production machine, designed for cutting tool manufacturers and carbide rod processors, has a large capacity magazine and an automatic loader to allow for hours of unattended operation.
Features and Specifications
- Cuts: Carbide and HSS rod and tool ends
- Size range: 1/8″ to 1-1/4″ (3 – 32 mm)
- Flood coolant system
- Adjustable hydraulic feed rate
- Automatic cutting cycle return and cycle stop
- Override for manual feeding
- Work piece V-block with carbide insert at cut zone
- Pneumatic clamping on one or both sides of the cut-off wheel
- Cut lengths from either side of cut-off wheel
- Replaceable carbide clamp inserts, optional brass
- Full enclosure
- Safety switch lockout for operator safety
- Door locked until completion of cut cycle
- Keeps coolant contained
- Waterproof LED work light
- 3 HP spindle motor
- 8″ diameter diamond or CBN cut-off wheel
- Dimensions: 46″W x 44″D x 57″H
- Weight (approx.): 700lbs., 800lbs. crated
Optional Accessories
- 30 Gallon Coolant System – two stage filter with 40 micron paper filter roll with 5 micron filter bag
- Mist Collection – high efficiency air filtration up to 97% on submicron particles
- Fire Suppression System – automatic thermal sensor
detection, manual emergency override

Easy-Cut XL
Description
Rush Machinery offers the new Rush Easy-Cut XL Semi-Automatic Carbide Cut-Off Machine for quick and easy cutting of carbide flat stock up to 2” X4” or rod, and tool ends with diameters between 1/8” to 2”. Also great for high speed steel. Built in the USA, the Rush Easy-Cut XL is fully enclosed and has semi-automatic or manual operation. The semi-automatic operation features an automatic clamping, down feed, and return cycle.
Features and Specifications
- Cuts: Carbide, HSS rod, and flat stock
- Size range:
- Round 1/8″ to 2″ (3 mm to 50 mm)
- Flat: Up to 2″ x 4″ (50 mm to 100 mm)
- 30 Gallon Coolant System – two stage filter with 40 micron paper filter roll with 5 micron filter bag
- 5HP spindle motor
Optional Accessories
- Mist Collection – high efficiency air filtration up to 97% on submicron particles
- Fire Suppression System – automatic thermal sensor
detection, manual emergency override