| | P01706 | Coupling Half – Heavy Duty | $20.00 | |
| | P01707U | Joint, Rubber Coupling – H.D. Urethane | $29.00 | |
| | P04001 | Motor 1/2 Hp 115/230 Volt 60 Hz Single Phase | $690.00 | |
| | P04002 | Screw, Hex Hd. (M10 x 25) | $2.00 | |
| | P04003 | Washer, Lock M10 | $2.00 | |
| | P04005F | Unavailable. Please call for alternative part. | | |
| | P04005G | Coupling Half | $38.00 | |
| | P04006G | Joint, Rubber Coupling | $35.00 | |
| | P04009 | Screw, Soc. Hd. Cap (M4 x 12) | $2.00 | |
| | P04010 | Flange, Ring (Motor Slide) | $18.00 | |
| | P04011 | Bearing, Ball (P06205) | $49.00 | |
| | P04012 | Cast, Grinding Head | $428.00 | |
| | P04013 | Nut, Hex (M10) | $1.00 | |
| | P04014 | Washer, Lock (M10) | $1.00 | |
| | P04015 | Bolt, T-Head 3/8″ x 1-1/2″ | $15.00 | |
| | P04016 | Screw, Hex Soc. Hd. Cap (M6x20) | $2.00 | |
| | P04025 | Screw, Knurled Hd. | $12.00 | |
| | P04028 | Washer, Spring Bearing | $6.00 | |
| | P04029 | Flange, Ring (Whl. Slide) w/Instr. | $25.00 | |
| | P04030 | Screw, Hex Socket Flat Head – (M4 x 10) | $2.00 | |
| | P04036 | Nut, Hex – Spindle – Straight Spindle Only | $15.00 | |
| | P04037 | Washer, Lock | $1.00 | |
| | P04038 | Screw, Hex Socket Head Cap | $2.00 | |
| | P04039 | Casting, vert. column | $428.00 | |
| | P04040 | Screw, Hex Soc. Hd. Cap | $2.00 | |
| | P04041 | See P04048 – Nut w/Lead Screw | | |
| | P04042 | Casting, Vert. Slide | $184.00 | |
| | P04043 | Casting, Screw Nut Block | $45.00 | |
| | P04044 | Screw, Hex Soc. Hd. Cap | $2.00 | |
| | P04045 | Gib. Taper, Vertical Slide (.498R6) | $65.00 | |
| | P04046 | Screw, Special Slotted Gib | $9.00 | |
| | P04047 | Screw, Hex | $2.00 | |
| | P04048 | Screw, Vertical Lead w/Nut (P04041) | $149.00 | |
| | P04049 | Key Shaft – Vertical Screw | $2.00 | |
| | P04050 | Plate, Vertical Slide End | $32.00 | |
| | P04051 | Washer, Lock | $1.00 | |
| | P04052 | Screw, Hex Soc. Hd. Cap | $2.00 | |
| | P04053 | Washer | $1.00 | |
| | P04054 | Screw, Hex Soc. Hd. Cap | $2.00 | |
| | P04055 | Bushing | $12.00 | |
| | P04056 | Bearing, Ball Thrust w/Washers | $39.00 | |
| | P04057 | Ring, Spacer | $11.00 | |
| | P04058 | Wheel, Vertical Crank | $70.00 | |
| | P04059 | Washer, Flat | $1.00 | |
| | P04060 | Nut, Hex Elastic Stop | $5.00 | |
| | P04061 | See P04062 Hex Nut Handle – Vert. Travel | | |
| | P04062 | Spindle, Crank Handle w/ P04061 & P04063 Screw, Hex Soc. Hd. Cap. Hand | $19.00 | |
| | P04063 | See P04062 Screw, Hex Soc. Hd. Cap. Hand | | |
| | P04118 | Housing Hinged Cover Wheel Guard | $184.00 | |
| | P04119 | See P04118 – Cover Wheel Guard | | |
| | P04120 | Key, Motor End (5 mm) | $10.00 | |
| | P04121 | Drive Pin | | |
| | P04122 | Plate, Reference Line | $7.00 | |
| | P04123 | Screw, Hex Soc. Hd. Cap | $2.00 | |
| | P04124 | Air Def. Wheel Guard w/ P04128 Mounting Block | $50.00 | |
| | P04125 | See P04120 – Key, Motor End (5 mm) | | |
| | P04127 | Nameplate, Safety | $5.00 | |
| | P04129 | Screw, Hex Soc. Hd. Cap | $1.00 | |
| | P04130 | Washer | $1.00 | |
| | P04131 | Angle Scale | $18.00 | |
| | P04132 | Plate, Reference Line | $7.00 | |
| | P04133 | Scale Spindle Height | $14.00 | |
| | P04136 | Motor 1 HP. 230/460V 3 Phase | $650.00 | |
| | P04138 | Cover, Accordion Upper Vertical | $95.00 | |
| | P04139 | Ball Bearing, Double Row | $135.00 | |
| | P04140 | Shaft Grinding (Taper Nose) | $250.00 | |
| | P04142 | Spacer for In-Between Grinding Wheels | | |
| | P04145 | Motor: 1/2 HP; 115/230V; 50/60 Hz; 1 Phase (Ocean Rejuvenator) | $450.00 | |
| | P0BF01 | Balancing Flange – Must be used with taper hubs to allow balancing | $79.00 | |
| | P0TH10 | 1 ” Taper Hub Std. (Includes Hub/Spacer/Washer/Nut) F/250A,252 | $165.00 | |
| | P0TH10NS | 1″ Long Taper Hub – No Spacer (washer included) – Capacity 5/8″ to 1″ – … | $169.00 | |