Rush Drill and Tool Grinders have helped thousands lower their hole-making costs through higher precision, faster production, less down time and reduced tool inventory.
The Rush Drill and Tool Grinders combine simplicity, accuracy, rapid set-up and versatility in one machine to allow the user to choose from a wide variety of HSS or carbide drill points to maximize
drilling performance for varied applications. With minimal setup change, stepdrills, taps, reamers,
countersinks and end mill ends can also be ground. The machines grind almost any point, stepdrills,
taps, reamers, end mills and countersinks (HSS or carbide). In addition, the standard workhead can
be exchanged in less than a minute with an optional air-bearing attachment for end mill O.D. grinding.
Machines are available from manual bench top to automatic-infeed floor models with capacities of .080” to 1-1/4”, 3/32” to 2”, and 3/16” to 3-1/8”.
Rush Machinery specializes in manufacturing, servicing and marketing a complete line of production
and support machinery for the cutting tool industry: Wheel Truing and Dressing Machines, Dynamic
Balancing Machines, Carbide Rod and HSS Cut-Off Machines, Grinding Fluid Filtration Systems,
Polycrystalline Tool Grinders, Drill and Tool Grinders, as well as Tool Grinding Fixtures.
A commitment to quality, service, and innovation since 1983 has made Rush Machinery an industry
Rush Machinery will showcase its Drill and Tool Grinders at IMTS 2016 – The International
Manufacturing Technology Show, being held at Chicago’s McCormick Place September 12-17. Rush
Machinery can be found in Booth N-7234.
FOR FURTHER INFORMATION, PLEASE CONTACT:
Rob Robbins, Sales Manager
RUSH MACHINERY, INC.
4761 Route 364
Rushville, NY 14544